 |
 |
|
|
 |
| |
 |
 |
| Our clutch and brake are DC power operated, and DC power supply units as followings are necessary. Selection according to the characteristics of clutch or brake is requested. |
|
model |
Merits and specification |
HD-100M
HD-100MA
|
| Merits: |
| ･ |
Small but high power. Applicable for clutch and brake upto 100watts. |
| ･ |
Easy to install with only two set bolts, and applicable for vibratory or humid condition(indoor use). |
| Specification: |
[HD-100M] |
[HD-100MA] |
rated input voltage.
AC |
200/220V |
100/110V |
rated output current.
DC |
1.3A |
1.3A |
rated output voltage.
DC |
DC 90V
(at input voltage of AC200V) |
DC 90V
(at input voltage of AC100V) |
| mechanical strength. |
impact: dropping of 1.5m hight. no injury.
vibrate: W=5mm, Hz=50 no injury.
|
| atmosphere temperature. |
-20~+60 °C |
| dimesion. |
73x70x40, pitch of holes for set bolts = 63 |
|
HD-110M3
HD-120M
 |
| Merits: |
| HD-110M3 |
| ･ |
Realize high-frequency driving by performing reshuffling from 180V to regular 90V with the output voltage instantly at no point of contact. |
| HD-120M |
| ･ |
Reduced consumption electricity to 25% in comparison with HD-110M3 by decreasing to steady voltage 45V. |
|
| Specification: |
[HD-110M3] |
[HD-120M] |
rated input voltage.
AC |
200/220V |
rated output current.
DC |
1.8A |
0.6A |
rated output voltage.
DC
(at input voltage AC200V) |
instant |
180V |
180V |
| always |
90V |
45V |
| duty cycle. |
inching : 8 times/min
steady : 30 times/min |
| mechanical strength. |
impact: dropping of 1.5m hight. no injury.
vibrate: W=5mm, Hz=50 no injury. |
| atmosphere temperature. |
-20~+60°C |
| dimesion. |
96x66x51, pitch of holes for set bolts = 84 |
|
|
|
 |
Order and Contact us
E-mail
Head office and Sales department oew-tokyo@osaki-ew.co.jp
Osaka sales branch oew-osaka@osaki-ew.co.jp
FAX
Head office and Sales department 81-3-5737-9105
Osaka sales branch 81-6-6451-7527 |
|
|
|
|
|
 |
